Ionity a décidé de changer les règles du jeu. Le réseau européen de recharges ultra-rapides, financé entre autres par Audi et Mercedes, va changer sa grille tarifaire. Et le prix du plein va exploser. 

Publicsenat.fr publie la circulaire adressée par Christophe Castaner aux préfets. Le gouvernement demande d’attribuer « de manière discrétionnaire » une nuance politique seulement aux communes de plus de 9.000 habitants. L’opposition y voit un moy...

Via (presque) SebSauvage :D

“🤭 @LCI
bravo au délégué syndical #CGT 👌

reformesdesretraites #greve13janvier #GilletsJaunes https://t.co/g5J4bHTZ5M”

Très bonne analyse de cette plaie. Toute à l'heure, j'étais dans un train. Tout le monde autour de moi, sans exception, avait un téléphone à la main et regardait l'écran. Même ceux qui se parlaient par intermittence.
De vrais zombies.

Voici un texte reçu aujourd'hui qui questionne notre rapport à cette grève et à ses revendications

On aura été des milliers de personnes à manifester pour ne pas travaillez plus longtemps et pour une allocation retraite digne. Mais, quelle est cette frontière magique qui retient cette grève à mettre en ...

Si ce n'est pas un fake, c'est énorme le niveau de connerie de l'entreprise à l'origine d'une telle notice...

Make sure that get the Fan SHIM on the correct pins and that you don't accidentally shift them over one pin to the left or one row down, or you're highly likely to damage your Fan SHIM and possibly your Pi.

If you're not using a case, the push your Fan SHIM all the way down onto the GPIO pins. If you're using Fan SHIM in one of our Pibow Coupé 4 cases, then you can just push it down part way onto the GPIO pins so that you can still access the right-angle tactile switch.

If you're happy that the Fan SHIM is mounted properly, then plug in your power supply and boot up your Pi now.
Installing the Fan SHIM software

For this part of the tutorial, you'll need a micro-SD card that's been set up with the Raspbian operating system, and to be connected to Wi-Fi. It's also really handy to have a display, keyboard, and mouse connected to your Pi for these next bits.

Open a terminal (press control-alt-t or find it in the Raspberry Pi menu) and then type the following to install the Fan SHIM Python library:

git clone h ttps://github.com/pimoroni/fanshim-python
cd fanshim-python
sudo ./install.sh

That installs the Python library itself, but we've put together a nice Python script that sets temperature thresholds (along with a couple of other options) and then turns the fan on automatically when it reaches a threshold and back off when it drops back below a second threshold.

The installer accepts three values, the first for the on threshold temperature at which the fan kicks in, the second for the off threshold temperature at which the fan stops again, and the third for the delay between each temperature reading.

In our testing, an on threshold of 65°C, an off threshold of 55°C, and a delay of 2 work pretty well. Type the following in the terminal to run the installer for the automatic script:

cd examples
sudo ./install-service.sh --on-threshold 65 --off-threshold 55 --delay 2

This installer will run the automatic script in the background, and it should even start running again if you shutdown and boot up again, or reboot.

The LED indicates the CPU temperature, with green being cooler and red being hotter. A long press on the button put the fan into manual mode and then a short press will stop or start the fan. Long pressing again will re-enable automatic mode.

If you ever need to stop the script running in the background, you can type in the terminal:

sudo systemctl stop pimoroni-fanshim.service

If you want to change the thresholds, e.g to change the on temperature to 75, the off temperature to 60, and the delay to 5 seconds, then you can type the following in the terminal:

sudo systemctl stop pimoroni-fanshim.service
sudo ./install-service.sh --on-threshold 75 --off-threshold 60 --delay 5

If you want to permanently disable the background script, you can type in the terminal:

sudo systemctl stop pimoroni-fanshim.service
sudo systemctl disable pimoroni-fanshim.service

Or to re-enable it:

sudo systemctl enable pimoroni-fanshim.service
sudo systemctl start pimoroni-fanshim.service

More examples

We've provided a few other examples that demonstrate the functionality of the Fan SHIM Python library, i.e. the RGB LED, and the tactile switch/button.

You can find the examples here, along with short descriptions of what each one does: https://github.com/pimoroni/fanshim-python/tree/master/examples.

The script supports these arguments:

    --on-threshold N the temperature at which to turn the fan on, in degrees C (default 65)
    --off-threshold N the temperature at which to turn the fan off, in degrees C (default 55)
    --delay N the delay between subsequent temperature readings, in seconds (default 2)
    --preempt preemptively kick in the fan when the CPU frequency is raised (default off)
    --brightness the brightness (value of HSV) of the LED (0-255, default 255)

Deprecated arguments

    --threshold N the temperature at which the fan should turn on, in degrees C (default 55)
    --hysteresis N the change in temperature needed to trigger a fan state change, in degrees C (default 5)

You can use systemd or crontab to run this example as a fan controller service on your Pi.

To use systemd, just run:

sudo ./install-service.sh

You can then stop the fan service with:

sudo systemctl stop pimoroni-fanshim.service

If you need to change the threshold, hysteresis or delay you can add them as arguments to the installer:

sudo ./install-service.sh --on-threshold 65 --off-threshold 55 --delay 2

To enable CPU-frequency based control:

sudo ./install-service.sh --on-threshold 65 --off-threshold 55 --delay 2 --preempt

You can also add --noled to disable LED control and/or --nobutton to disable button input.

Si jamais les commandes ci-dessus ne fonctionnent pas, il faut ajouter l'utilisateur courant au groupe gpio (groupe à créer s'il n'existe pas) :

sudo usermod -a -G gpio YourUserName

Ensuite, il faut relancer les services :

sudo systemctl daemon-reload
sudo systemctl stop pimoroni-fanshim
sudo systemctl start pimoroni-fanshim

Un peu extrême je trouve mais à creuser.